| 1-PORT 10/100MBPS Multi-functi |
 enlarge
|
Model: TE100-MP1U
Brand: Trendware
Manufacturer: Trendware Usa
Average Rating: 
(submit your review here)
Total Reviews: 1
Form factor: External
Hardware platform: PC
Data link protocol: Ethernet, Fast Ethernet
|
|
|
| |
| Features: |
Compliant with USB 2.0 high-speed printing
Supports most USB printers and all-in-one multi-function printers
One USB 2.0 port and one RJ-45 10/100Mbps auto-negotiation fast Ethernet port
TCP/IP protocol supports DHCP, SNMP, UPnP, FTP
Provides two types of storage access modes - netUSB mode and server mode |
| |
| Description: |
| What do you do when you have one printer to share with all computers on an ethernet network? This device lets you use that printer for accessability to every computer on that network. Turn any stand-alone multi-function USB printer into a shared resource on your network with the TE100-MP1U 1-Port 10/100Mbps Multi-Function USB 2.0 Print Server. It's easy since an intuitive utility application and user-friendly configurations provide a seamless user interface. Get effective solutions to the challenge of sharing multi-function printer, fax, scanner and storage devices with support for most operating systems. Simply connect a multi-function device to this product for instant multimedia and file sharing. LED indicators, bidirectional support and e-mail notifications allow for easy management. Please make sure your printer is capable of handling the shared workload of your network. Supports USB storage devices such as hard drives, flash drives and memory card readers Supports SANE servers for scanners Supports auto-connect for printing and scanning Email notification for adding/removing USB devices or system error messages Windows based utility program and Web based configuration Built-in flash memory for easy firmware upgrade Standards IEEE 802.3 10Base-T & IEEE 802.3u 100Base-TX Printer Interface - USB 2.0, 1.1 compliant USB type A port, LAN Port 10/100Mbps auto-negotiation UTP/STP Ethernet port USB Storage NetUSB Mode - Single-user access, FAT12/16/32(read/write) and NTFS (read/write) Server Mode (FTP/SMB server) - Multi-user access. FAT12/16/32(read/write) and NTFS (read) Diagnostic LEDs - Power, link, status, USB1, USB2 Transport Protocol TCP/IP - Supported DHCP, SNMP, UPnP, FTP Compliant with Windows 2000/XP/2003 Server/Vista (32-Bit) operating systems CE, FCC Certification Dimensions - 3.15 x 2.36 x 0.98 inch (80 x 60 x 25mm) Weight - 55 grams (1.94 ounces) |
| |
| User Reviews (1 total): |
Page 1 of Total 1 Pages
|
Worked like a charm, October 27, 2007
By RegularCA User (Bay Area, CA)
The only regret I have at the time I purchased this is that I didn't see that there was a $20 rebate for the 2-port version bringing the price to about the same as this item. Installation was relatively easy. They have a utility to make it easier to install but I didn't have to use it. XP and Vista had all the drivers I needed. I'm able to print on an HP printer via my Windows XP computers that are "wired" to my network and my Windows Vista laptop that's hooked up wirelessly. I didn't connect this to a multi-function printer that so I can't comment on the scanning or faxing.
|
|
|
Page 1 of Total 1 Pages
|
|
| Copyright 2001-2007 WiFiReview.com |
|